In this Instructable, I am going to show you how to build a Solar powered WiFi Weather Station with a Wemos board. The Wemos D1 Mini Pro has a small form-factor and a wide range of plug-and-play shields make it an ideal solution for quickly getting started with programming the ESP8266 SoC. It is an inexpensive way to build the Internet Of Things ( IoT ) and is Arduino compatible.
You can also look at my new version- 3.0 Weather Station.
You can also look at my new version-2.0 Weather Station.
You can buy V2.0 PCB from PCBWay.
You can find all of my projects on https://www.opengreenenergy.com/
The new Weather Station has the following features:
1. The Weather Station can measure: Temperature, Humidity, Barometric Pressure, Altitude
2. You can monitor the above weather parameters from your Smartphone or from the web ( ThingSpeak.com )
3. The whole circuit along with the power supply is put inside a 3D printed enclosure.
4. The range of the device is enhanced by using a 3dBi external antenna. It is around 100 meters.
